English
-24-
8. Specifications
DVB-T/T2 Band
6, 7, 8MHz
DVB-T/T2 Frequency
VHF: 177.5~226.5MH
UHF: 474~858MHz
z
Video
Output
HDMI, SCART
USB Port
USB 2.0 host (5V)
Power Input
AC 220~240V 50/60Hz
Power consumption
< 12.0 W
Dimensions
168 x 118 x 37 mm
Net Weight
338g
DVB-T/T2 Video Decoder
MPEG-2 MP@HL
HEVC/H.265 up to 1920 x 1080 50/60Hz
AVC/H.264,
[email protected]
MPEG4 A SP
DVB-T/T2 Audio Decoder
MP3 WAV AAC AC3 WMA
Media Formats
mp3, ac3, m4a, aac, wav, wma, ogg, flag
jpg jpeg, bmp, png
,
mpg, mpeg, dat, ts, trp, tp, m2ts, vob, mp4, mov,
mkv, divx(optional), avi, flv, 3gp
Music
Photo
Movie
- Timeshift to Record:
Use ◄ and ► to change between
On
and
Off
.
Note: if Timeshift to Record is set to
On
, the program will be recorded while
time shifting.
- PS Record:
The
PS Record
(Program Stream Record) function allows you to record only
the current program. Enabling this function will reduce the size of the
recording file.
◄ / ► : Change between
On
and
Off
.
- After Recording:
Use ◄ and ► to change between
Watch TV
and
Go to Stand-by Mode
.
-25-
Problems
9. Troubleshooting
No Power
• Plug the power cord into the wall socket tightly and turn on the device.
• The status LED lights green while switched on and red in standby mode.
• Check the connection to the TV or monitor.
• Ensure the correct source is selected.
• Check the video input on your TV or monitor.
• Change the aspect ratio of the DVB425 by pressing .
• Change the Video Format of the DVB425 to reduce the resolution of
the image by pressing .
Possible Causes and Solutions
No Signal
• The signal provided by the aerial may be too weak or the aerial may be
improperly connected.
• If you are using a rooftop aerial, ensure that the DVB425's Antenna
Power option is set to Off. Please refer to section 7.2.3.
• If you are using an indoor aerial, try moving it around or changing
its position.
• Try using another connection cable.
Picture Freezing,
Sound Distorting
• If the signal is too weak, please try using a rooftop aerial or an
amplified aerial.
• You are using a rooftop aerial, ensure that the Antenna Power option
is
Off
. Please refer to section 7.2.3 for further instructions.
• If you are using an indoor aerial, try moving it around or changing
its position.
• Change the batteries.
• Ensure that you are within the remote control's operating range
(max 8 meters, 30
°
)
• Move the DVB425 away from direct sunlight.
.
Remote control
does not work
• Ensure that a USB storage device is connected to the USB port.
• Ensure that there is sufficient free space on the USB storage device.
• Try using another USB storage device with sufficient space.
• Please refer to section 6.2.8.
No Recording
No Timeshift
• The Timeshift function is not enabled by default. Please refer to
section 6.2.9 for instructions on how to enable it.
• Ensure that there is sufficient free space on the USB storage device.
No sound
No image
• Press <MUTE> to unmute.
• Press <VOL+> to increase the volume.
• Check the volume on the TV or monitor.
• Check cable connections.
Password
• The default password is 0000.
Factory reset
•
• Go to Tools and press
OK
to enter.
• Select Factory Reset.
• Press
OK
, then enter the password. The default
password is 0000.
• Select Yes to reset the device to the default factory settings or
select No to exit. Once the default settings have been restored, the
Installation Guide will appear.
Press
MENU
to access the main menu.
