Auerswald a/b-Audiobox, Руководство по эксплуатации

Страница: 25 / 40

Settings
a/b-Audiobox - Operation Guide - V03 10/2020
25
Setting the Switching Time of the Switching Function
The switching function's switching time specifies how long the switch contacts
on the switching output are switched on, if they have been switched on during
the establishment of a connection.
Note: The switching time does not apply if the switching function is
switched manually.
Requirements:
– Connection has been made to the internal a/b port on a PBX
– An internal telephone number has been set up for the a/b-Audiobox on the
PBX
– Knowledge of the PIN (0000 in the factory settings)
– DTMF-enabled internal telephone or DTMF tone generator
– Programming mode has been initiated (by pressing and holding the pro
-
gramming key for five seconds)
1. Pick up the receiver of an internal telephone.
2. Dial the internal telephone number of the a/b-Audiobox.
This establishes the connection.
3.
Dial
*
.
You will hear the confirmation tone (five sequential tones).
Note: If you only hear a short sound instead of the confirmation tone (after
restarting programming mode), enter the PIN and then dial
*
again.
4.
After the confirmation tone ends, dial one of the following character strings.
6100
: The switch contacts remain switched on until the end of the
announcement (factory settings).
6101
: The switch contacts remain switched on for 1 second.
6102
: The switch contacts remain switched on for 2 seconds.
...
6190
: The switch contacts remain switched on for 90 seconds.
You will hear the confirmation tone (five sequential tones).
The a/b-Audiobox continues to be in programming mode. For ad
-
ditional programming actions, begin with the 3rd step.