Auerswald a/b-Audiobox, Руководство по эксплуатации

Страница: 24 / 40

Settings
24
a/b-Audiobox - Operation Guide - V03 10/2020
Switching the Switching Function during Establishment of Con -
nection On/Off
If the switching function during establishment of connection is switched on, the
switch contacts on the switching output are switched on immediately when the
a/b-Audiobox receives a call from an internal telephone.
If the switching function during establishment of connection is switched off, the
switch contacts on the switching output can only be switched manually.
Requirements:
– Connection has been made to the internal a/b port on a PBX
– An internal telephone number has been set up for the a/b-Audiobox on the
PBX
– Knowledge of the PIN (0000 in the factory settings)
– DTMF-enabled internal telephone or DTMF tone generator
– Programming mode has been initiated (by pressing and holding the pro
-
gramming key for five seconds)
1. Pick up the receiver of an internal telephone.
2. Dial the internal telephone number of the a/b-Audiobox.
This establishes the connection.
3.
Dial
*
.
You will hear the confirmation tone (five sequential tones).
Note: If you only hear a short sound instead of the confirmation tone (after
restarting programming mode), enter the PIN and then dial
*
again.
4.
After the confirmation tone ends, dial one of the following character strings.
601
: Switches on the switching function during establishment of connection
(factory settings).
600
: Switches off the switching function during establishment of connec -
tion.
You will hear the confirmation tone (five sequential tones).
The a/b-Audiobox continues to be in programming mode. For ad
-
ditional programming actions, begin with the 3rd step.