-
INSTALLATION
PRIMO PILOT
MANUAL
-
5
2 -PLEASE READ
IMMEDIATELY
This technical installation manual forms part of the appliance which
it refers to. In order for the warranty to be valid, the instructions must
be read prior to using the appliance.
The safety advice and instructions provided in this manual must be
strictly respected.
Our society is not liable for any damages caused from not following
the instructions provided, or improper handling, installation or use.
This technical installation manual can be modifi ed without prior
notice.
This manual must be safeguarded and passed on to successive users
for future reference.
It will be considered as evidence in case of litigation.
2.1 - Conservation of documents
DHW ....... Domestic Hot Water
DCW ....... Domestic Cold Water
T° .............. Temperature
HP ............ Heat pump
2.3 - Abreviations and acronyms
2.4- Delivery terms and conditions
In general, the material is transported at the recipient’s own risk.
It is important to ensure that all components have been received and
that no damage has been sustained during transport upon receipt
of the appliance, and before beginning the installation procedures.
2.2 - Symbols used
Indicates warnings and important recommendations.
Contains regulated substances, do not throw in the
garbage. If disposing, please respect all regulations
pertaining to the recovery of electric and electronic
equipment.
Consult the installation manual before any intervention
on the product, before handling, installation, use , and
maintenance.
Maximum working pressure.
PS max
Heat power output produced.
Indicates the maximum water temperature in operation.
Admissible storage and transport temperatures are from -20°C to
+60°C.
The
PRIMO Pilot
must be stored and transported on its pallet and
in its original packaging and empty of water.
2.5 - Storage and transport
2.8 - End of life of the appliance
Our products are designed and manufactured using
components made of recyclable materials.
The appliance must never, in any case, be disposed of
with household waste, or in a dump.
The dismantling and recycling of the appliances must be
taken charge of by a qualifi ed professional and in compliance with
all local and national standards in eff ect.
2.7 - Rating plate
2.6 - Unpacking
On reception of the
PRIMO Pilot
,
check the state of the cardboard
packaging as well as the general
state of the product, and remove
it from its cardboard box.
Opening the front panel of the
PRIMO Pilot
allows you to access
the box of included accessories
as well as the electrical terminal
for connection to the electrical
supply and to the different
control components.
1- To remove the front panel,
unscrew the two TH7 screws
which are located on both
sides underneath the
PRIMO
Pilot
.
2- Pull the base of the front panel
forwards, and lift the panel to unhook the pegs located at the top
of the
PRIMO Pilot
.
To replace the front panel, rehook the pegs in place at the top of
the
PRIMO Pilot
, replace the panel back into position and screw
the two TH7 screws back in.
