auer PRIMO pilot, Техническое руководство по установке

Страница: 6 / 36

-
INSTALLATION
PRIMO PILOT
MANUAL
-
6
3 - INTRODUCTION
3.1 - General information
3.2 - Packaging
Weight
(kg)
Number of
packages
W
(mm)
H
(mm)
D
(mm)
Primo
pilot
33 1 440 810 380
3.4 - Accessories avalable as optional
extras
• PEJ 120, 200 et PEJ 270
DHW tank for the production of domestic hot water
120 L :
Ref. 341109
200 L :
Ref. 341111
270 L :
Ref. 341106
3.4.1 - Installation
• 2-core sheathed connecting cable (lg20m)
To connect the heat pump and the pilot, to be used instead of
the standard 10m cable.
(
Ref. 753102
)
• Ambient temperature thermostat radio non-
chronoproportional -(TH
Rnc
)-
Wireless - on/off type, programmable thermostat, transmitting
through radio-frequency. Necessary when a wired connection
between the Pilot and the ambient temperature thermostat is
not possible
(
Ref. 770001
)
• DHW sensor
For the production of domestic hot water
(
Ref. 710029
)
• Overheating protection thermostat for underfl oor
(
Réf. 710111
)
• Ambient temperature thermostat (TA)
2 wires - allows to control the temperature in the
heating zone
(
Ref. 710043
)
• Ambient temperature sensor (SA)
2 wires - allows to control the temperature of
the heating zone on a variety of comfort levels
(programmable from the pilot).
(
Ref. 751009
)
3.4.2 - Control
The PRIMO Pilot is a hydraulic pilot which ensures the control
of a heating circuit and -depending on the options selected- the
production of domestic hot water for the household.
The PRIMO Pilot is meant to be connected to an
HRC
70
or HTI
70
range heat pump).
The PRIMO Pilot is delivered ready to use in its factory set
confi guration (see § «Set-up»).
This configuration allows a simpified start-up, with factory set
parameters and without access to certain settings.
However, set-up is strongly recommended as it allows for use to be
personalised for the household. This confi guration and its settings
can be modifi ed in the expert menu.
Équipements Primo
Electrical resistance of the back-up 3 kW
Expansion vessel 8 litres
Multifunctional tank ensuring the uncoupling
of the hydraulic circuits
18 litres
Electronic control taking charge of the optimal
management of the installation

Essential components for the protection of
the hydraulic circuits (pressure relief valves,
automatic purgers, pressure sensors)

Scheduled programming of the comfort mode
for the 7 days of the week using programmable
ranges

3.3 - Accessories (included)
Each PRIMO Pilot is delivered with (non-mounted):
• Hydraulic Decoupling Kit
Decoupling HP circuit/ heating circuit
(Ref. 753103)
• Exterior sensor
Allows to adapt the heating temperature to
the outside climate.
• USB memory stick
Allows you to take the operating
history
Ensure to keep the original delivered USB fl ash drive.
It will facilitate your exchanges with your technical contacts