background image

15

User’s Instruction

Captioning

Many TV shows contains “closed captions”. These captions are hidden words that can be displayed on your TV
screen. There are two types of these words : “captions” usually follow the action on-screen, providing a written version
of the dialogue, narration, and sound effects ; “text” is not usually related to the action on-screen, often providing
information such as news or weather. A TV program might be providing more than one set of captions or one set of text.

To set your TV to display captions or text.

1 With the TV turned on, press the MENU button until “Special” menu will be displayed.
2 The “Closed Caption” item be selected. To turn captioning on, use the     VOL     buttons to select Captions

(C1 or C2) or Text (T1 or T2). At the time these instructions were written, only C1 is normally available, but feel free
to try the other selections.

3 Wait 10 seconds, or press the MENU button to return to normal TV viewing. Your setting will remain intact until you

change it.

Closed Caption :         OFF
CC on Mute : 

OFF

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

1

Closed Caption :         C1
CC on Mute : 

OFF

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

2-1

Closed Caption :         T1
CC on Mute : 

OFF

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

2-2

CC on Mute

When the sound is muted, user can select the caption display. It will display the caption content instead of sound mute.
1 With the TV turned on, press the MENU button until “Special” menu will be displayed.
2 Use the     CH     buttons to select “CC on Mute” item.
3 Use the     VOL     buttons to select “C1” or “C2”.

Closed Caption :         C1
CC on Mute : 

OFF

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

1

Closed Caption :         C1
CC on Mute : 

OFF

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

2

Closed Caption :         C1
CC on Mute : 

C1

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

3

Closed Caption :         C1
CC on Mute : 

C2

Power Restore : 

OFF

System : AUTO  

Select

Special

Adjust

Exit

2-2

Содержание DTH-14U1






















































Отзывы: