background image

10

User’s Instruction

Add/Delete Channels

                                     Air 11
This channel is in memory.
Press VOL      to delete.
Press CH    for other channels.

Press MENU to return

to Set-Up menu.

4

Add/Delete Channels

                                     Air 11
This channel is in memory.
Press VOL      to delete.
Press CH    for other channels.

Press MENU to return

to Set-Up menu.

5

Add/Delete Channels

                                     Air 11
This channel is in memory.
Press VOL      to delete.
Press CH    for other channels.

Press MENU to return

to Set-Up menu.

6

Displaying the Current Channel

1 To quickly see the current channel number and status, press

DISPLAY button on the remote control. The current channel number
and status will be displayed.

Changing the TV’s Input

Normally, your TV displays the signal coming through the antenna terminal.
However, If you’ve connected another component to your TV(such as a VCR) using the Video/Audio input,  you will want to
be able to view the signal from the component.
To do this, you will need to switch from the ‘TV’ input to the ‘Line’ Input, as follows.

1 With the TV on, press the MENU button twice, then “set-up” menu will appear.
2 Use  the     CH      buttons to select “Input”.
3 Press the     VOL     buttons to change from ‘TV’ to ‘Line’.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.

Select

Set-Up

Language :                   English
Reception :                   Air
Memorize Channels
Add/Delete Channels
Input : 

TV

Adjust

Next

1

Select

Set-Up

Language :                   English
Reception :                   Air
Memorize Channels
Add/Delete Channels
Input : 

TV

Adjust

Next

2

Select

Set-Up

Language :                   English
Input : 

Line

Adjust

Next

3

Содержание DTH-14U1






















































Отзывы: