ADVANCED MANUAL / Bit One /
24
From this point on follows a simulation of a system made up of:
- 3-way Front/ - 2-way Rear / - 2-way centerl / - mono Sub.
The Bit One features 8 output channels. To multi-amplify
each single speaker of the system 13 output channels
would be required. In that case the software would automatically
signal the limit.
Here it is how the Bit One software shows
the speakers selected in the system
“Input level too low“
Should the procedure get interrupted during the calibration with
the above message showing up, check if the signal or its level
is present on the indicated corresponding channel.
Press
CANCEL
to log out the program.
Press
BACK
to go back to the inputs set-up
(
see section 8.3.2
)
.
Speakers can be selected just by clicking on it.
If the left tweeter, left midrange or left woofer are selected, the
software provides the ability to automatically activate also the right
tweeter, right midrange or right woofer.
Once the software has been started up, this choice will affect the
dedicated crossover type.
4.
How to select the speakers available in the system
POSSIBLE ERROR MESSAGE
If you want to use a coaxial system as rear channel, both tweeter
and woofer need to be selected and after that
(see point n. 5)
you need to enter that a passive crossover connecting one to the
other is present in the system, so the software will show a
high-pass filter as available.
Press
BACK
to go back to the previous step.
Press
NEXT
to go ahead with the set-up procedure.
Press
CANCEL
to exit the program.
3.
Automatic calibration
Through a real-time progress bar and specific messages
the software shows how the procedure is being executed.
Once the procedure is completed, the window will show
the message “Press Next to Continue”.
Press
BACK
to go back to the previous step.
Press
NEXT
to go ahead with the set-up procedure.
Press
CANCEL
to exit the program.
Ex.:
if on the rear system only the woofers were activated, the
software will show exclusively a low-pass or band-pass filter as
available.
Screen
image
sequence
3
4
8
