Adjusting the DWS-160E system.
Be aware that it might be possible your model is equipped with 2 version of adjustment.
Please see the next chapter when the lift is equipped with an electronic height
adjustment.
The difference is that the electronic version has NO yellow and white adjustment knobs
as illustrated below.
When the Total system is installed please plug in the power.
The system is equipped with a wireless transmitter mounted on the back.
The system itself is already set to standard limits. Never adjust the upper limit!
At the front of the lifting head colored knobs
are visible. With an alan key the positions
can be set by adjusting their position.
Adjusting the upper limit
:
White knob,
While giving command up adjust the white knob with
an alan key. Check left and right turning for adjusting
the right direction.
Adjusting lower position
:
Yellow knob,
While giving command up adjust the yellow knob with
an alan key. Check left and right turning for adjusting
the right direction.
Attention!
When adjusting the motor limit, be aware that mechanical limits may damage
the motor by setting the limits too far.
The motor can be overloaded and damage.
Max. motor runnig time 4 minutes.
Cooling down time 9 minutes at 4 minutes use.
Be sure that all parts move and rotate free.
Disconnect power afther installation.
