Check at arrival the packaging to determine there’s no damage to the system.
With detected damage inform your transporter in time.
Installation of the DWS-120E / 160E & DFS-120E:
When the system is taken out of it’s packaging (with care) it is important to check the
following items:
-Steel cable on the motor drum (see next page).
-Proper fitting of the monitor cart between the 2 columns.
The system must be mounted to the wall, inclusive the transport security aids. This will
help installing the system, keeping the product steady and strong.
Transport security bar
The top bar must be kept installed and may not be removed.
Only the bottom beam (red in drawing) can be removed afther proper installing.
It is possible to lower the top bar, but only afther setting the right end stops of the lift
system (see next pages).
