PS1150M
6
4 ohm nominal
4 ohm nominal
4
1.4
.5
2
Hz
Hz
Splice (as necessary)
Empalme (como necesario)
Épissez (selon les besoins)
Wiring (continued)
Speaker Wiring
The Speaker Wiring diagrams illustrate options for connecting one or two subwoofers.
Two Subwoofers
Dos Subwoofers
Deux Subwoofers
One Subwoofer
Un Subwoofer
Un Subwoofer
Pass-Thru RCA Outputs
The output signal allows you to conveniently connect other amplifiers to each other.
Input Wiring
Low Level Input (RCA Input)
Low level (RCA) input is preferred for best performance. Most trunk/hatchback installations will
require a 15-20 foot RCA cable, while pickup trucks and under-seat mounting will require a 6-
12 foot RCA cable. Connect an RCA cable from your receiver to the RCA input on your
amplifier.
High Level Input
High level input should be used when an RCA output is not available from the receiver.
Connect the speaker outputs from the receiver to the high level input connector.
NOTE: Connect either the low (RCA) OR high-level input – DO NOT connect both at the
same time.
RCA Output
Cableado de la Salida
Câblage de Rendement
Input Wiring
Cableado de Entrada
Câblage d’Entrée
