background image

128-6454

4 of 12

Page 4

1. As you approach the vehicle, press and release the Unlock/Disarm button on the

keychain  transmitter.

þ

 The dash mounted LED turns off.

The LED will start flashing rapidly, indicating that the system is re-arming
automatically. Open any door to suspend the automatic arming.

þ

 Parking Lights flash two times.

If the parking lights flashed three times, then the alarm was triggered in
your absence. Before turning the key on, examine the LED to identify
which zone was triggered.

þ

 Siren sounds two chirps.

If the siren sounds 4 chirps, then the alarm was triggered in your
absence. Before turning the key on, examine the LED and refer to the
INTRUSION WARNING SIGNALS section of this manual to identify
which zone was triggered.
If the siren did not sound when disarming, then the chirps have been
turned off, and you should refer to the section titled “ ELIMINATING
THE ARM / DISARM CHIRPS “ in this manual.

o

 Doors Unlock - Optional

o

 2 Step Doors Unlock - Optional

NOTE: If the optional Headlamp illumination feature has been added, and has been selected

for operation when disarming, as an added convenience, the system will turn on the
headlights when the system is disarmed.

SILENT DISARMING (Must be activated during programming)
NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter

button is activated, the drivers door only will unlock, pressing the unlock button a
second time will cause all doors to unlock.

NOTE: If your transmitter has been configured with single button Lock/Unlock as shown, to

activate the all door unlock feature operate the Lock/Unlock button a second time
within 3 seconds of the first unlock command.

1. Press and hold button the Unlock/Disarm button on the keychain transmitter for 2 seconds.

þ

 The dash mounted LED turns off.

The LED will start flashing rapidly, indicating that the system is re-arming
automatically. Open any door to suspend the automatic arming.

þ

 Parking Lights flash two times.

If the parking lights flashed three times, then the alarm was triggered in
your absence. Before turning the key on, examine the LED to identify
which zone was triggered.

þ

 Siren will not sound.

If the siren sounds 4 chirps, then the alarm was triggered in your
absence. Before turning the key on, examine the LED and refer to the
INTRUSION WARNING SIGNALS section of this manual to identify
which zone was triggered.

o

 Doors Unlock - Optional

o

 2 Step Doors Unlock - Optional

Содержание APA-800a













Отзывы: