12
Connectors and control units
1
Input Ground switch
Defines the connection between the vehicle
ground and the signal ground of the input.
2
Status LED
This LED indicates the operating mode of the
amplifier.
3
Gain
Control for adjusting the input sensitivity of
the
Line
Input
.
4
Line Input
RCA/Cinch inputs for connecting pre-amplifier
signals.
5
Speaker Output
Speaker outputs for connecting speaker
systems.
6
Mono / Stereo Mode (MSM) LED
This LED indicates the operating mode of the
Speaker Output
(Default setting: 1-channel
mode, LED off).
7
REM IN / OUT
Connector for the remote in- and output.
8
+12 V
Connector for the +12 V power cable of the
positive terminal of the battery.
9
GND
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
1
2
6
5
7
8
3
4
9
