Use only the adaptor included with this
AudioPressBox. Use of a different adaptor may
result in equipment damage, overheating, or fire.
Be sure to unplug the adaptor from the outlet
when not using AudioPressBox, or when there
are lightning storms in the area.
To avoid generating unwanted noise, make
sure there is 50 cm or more between the
power adaptor and AudioPressBox.
•
Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such
as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of
panel disfiguration or damage to the internal components.
•
Do not place the device in an unstable position where it might accidentally fall over.
Connections
•
Before connecting the device to other devices, turn off the power for all devices. Before
turning the power on or off for all devices, set all volume levels to minimum.
Handling caution
•
When turning on the AC power in your audio system, always turn on the power amplifier
LAST, to avoid speaker damage. When turning the power off, the power amplifier should
be turned off FIRST for the same reason.
CAUTION
•
Do not insert your fingers or hands in any gaps or openings on the device.
•
Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or
openings on the device If this happens, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the device inspected by qualified AudioPressBox
service personnel.
•
Do not use the device or headphones for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
•
Do not rest your weight on the device or place heavy objects on it, and avoid use excessive
force on the buttons, switches or connectors.
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
AudioPressBox cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.
Always turn the power off when the device is not in use.
The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualified AudioPressBox service personnel about
replacing defective components.
Illustrations herein are for explanatory purposes only, and may not match actual appearance during operation.
Company names and product names herein are trademarks or registered trademarks of their respective companies.
Specifications and descriptions in this owner’s manual are for information purposes only. AudioPressBox reserves the right to change or modify products or specifications at any time without prior
notice. Since specifications, equipment or options may not be the same in every locale, please check with your AudioPressBox dealer.
3
