background image

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, 
fire or other hazards. These precautions include, but are not limited to, the following:

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property.
These precautions include, but are not limited to, the following:

Power supply/Power cord

Only use the voltage specified as correct for the device. The required voltage is printed

on the name plate of the device.

Use only the specified AC power adaptor.

Do not place the power cord near heat sources such as heaters or radiators, and do not

excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a

position where anyone could walk on, trip over, or roll anything over it.

Do not open

Do not open the device or attempt to disassemble the internal parts or modify them in any

way. The device contains no user-serviceable parts. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified AudioPressBox service

personnel.

Power supply/Power cord

Remove the electric plug from the outlet when the device is not to be used for extended

periods of time, or during electrical storms.

When removing the electric plug from the device or an outlet, always hold the plug itself

and not the cord. Pulling by the cord can damage it.

To avoid generating unwanted noise, make sure there is 50cm or more between the AC

power adaptor and the device.

Do not cover or wrap the AC power adaptor with a cloth or blanket.

WARNING

CAUTION

Water warning

Do not expose the device to rain, use it near water or in damp or wet conditions, or place

containers on it containing liquids which might spill into any openings.

Never insert or remove an electric plug with wet hands.

If you notice any abnormality

If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of

sound during use of the device, or if any unusual smells or smoke should appear to be

caused by it, immediately turn off the power switch, disconnect the electric plug from

the outlet, and have the device inspected by qualified AudioPressBox service personnel.

If this device or the AC power adaptor should be dropped or damaged, immediately turn

off the power switch, disconnect the electric plug from the outlet, and have the device

inspected by qualified AudioPressBox service personnel.

Location

Before moving the device, remove all connected cables.

When  setting  up  the  device,  make  sure  that  the  AC  outlet  you  are  using  is  easily

accessible. If some trouble or malfunction occurs, immediately turn off the power switch

and disconnect the plug from the outlet.

Avoid setting all controls to their maximum. Depending on the condition of the connected

devices, doing so may cause feedback and may damage the speakers.

2

Содержание APB-216 C-D












Отзывы: