5
Wrong speaker polarization will result in severe loss of sound quality!
The nominal loudspeaker impedance must be 4 ohms or higher.
Although the AMP III has a protection circuit to prevent damage of the
system, switch off the unit while working on the loudspeaker cables.
Never use force or tools tightening the terminal screws!
For bi-wiring the loudspeakers with your Audionet AMP III please use
two loudspeaker cables and remove the "bridge" at the speaker terminals.
Insert the "tweeter" cable from the rear using banana plugs and mount the
"bass" cable from the side. In doubt please ask your dealer for assistance.
A 6.3mm headphone jack is located on the rear of your AMP III. The
signal on this socket is permanently active and cannot be switched off.
Please be aware that listening music via headphones can seriously dam-
age your ears! The program can start suddenly!
Headphones
