3
Installation and power supply
Please find a place for your Audionet AMP III that is sufficiently venti-
lated to allow the heat to dissipate.
Connect the power jack at the rear to your wall outlet. You should either
use the provided power cord or another one allowed for your home coun-
try specifications. Tuning with "audiophile" power cords can lead to im-
proved sound field. Ask your dealer for assistance.
NOTE: The power specifications on the rear must meet to your home
country specifications. The AMP III is a Class I-system and must be
earthed. Please ensure a stable earth connection.
Your Audionet AMP III is able to detect a wrong polarizing of the mains.
If you see the front lamp flashing quickly when powering on, flip the plug
in your wall outlet (also see below).
Additionally, on the rear panel you find a mark "phase" next to the mains
connector. If you have the optional "Audionet Power Cord", APC, the
phase is also marked on the wall plug itself.
The correct polarizing of the mains is important for reasons of audio clar-
ity and stability.
Placing
Connecting
Mains phase detection
