- Commissioning -
38
3 Commissioning
3.1
Safety information
NOTE!
Before commissioning, it is essential that you read the safety information at
the beginning of this manual.
3.2
Check contents of pack
The following items are supplied:
one base station
one power supply
one handset with belt clip
one accupack
one telephone connecting cable
one Operating Manual
3.3
Connecting the base station
Position the base station near to your telephone socket and a mains socket. Your
telephone works using the TTD dialling system (Touch Tone Dialling).
1.
Insert the power supply plug into the
socket on the rear side of the
base station and insert the plug-in mains power supply into a properly
installed 230V mains socket. The base station plug-in mains power supply
must be connected at all times. For safety reasons, use only the plug-in
mains power supply supplied.
2.
Connect the telephone cable supplied to the telephone socket and the
phone jack
on the rear side of the base station. Use only the new
telephone cable supplied.
