- Commissioning -
39
3.4 Fitting
the
accupack
To fit the accupack supplied into the handset, press on
the top edge of the accu compartment cover and slide it
downwards. Now insert the accupack supplied and close
the accu cover.
Important information:
Place the handset with the display to the front on the base
and charging station for at least 16 hours. If the accupack is not correctly charged,
the telephone may not work properly. While the handset is being charged, the
battery capacity symbol
will flash in the display.
3.5
Charging the accupack
The rechargeable accupack in your handset have a standby time of max. 6 days at
room temperature and a maximum talk time over 8 hours. To charge the accupack,
place the handset in the base station. The current capacity will be shown in the
display.
full
Less than 30 minutes
No display
accupack is discharged
Note:
The accupack must be charged for at least 16 hours before being used for
the first time. Exactly like your car battery, the rechargeable accupack is
unavoidably subject to a certain ageing. However, you can have an influence on
this ageing process by “training” the accupack to a certain extent. In regular use of
the phone, if you cyclically charge and fully discharge the accupack by using the
telephone until the symbol appears in the display, a demand is placed on the
accupack and they will repay you by giving maximum performance and a long life.
Extended charging and extended discharging on the other hand will both degrade
the capacity and shorten the life of the accupack.
3.6
Fitting the belt clip
Slide the belt clip into the grooves until it audibly clicks home.