- Operation -
41
4.2
Receiving calls
When a call comes through, the ringing tone will sound on the handset. The
symbol
will flash in the display. Press the call button
on the handset and
the connection will be made. To end the call, replace the handset in the base
station or press the call button
on the handset.
Note:
If the telephone handset stands on the base station, press the call
button
first.
4.3
Making calls
1.
Enter the required telephone number using the keypad. The numbers
pressed will be shown in the display.
2.
Press the call button
and the required connection will be made.
Note:
If you have entered a wrong number, you can delete the phone number by
repeatedly pressing the
button. The number can be deleted completely by
prolonged pressing of the
button.
You can also press the call button
first and thus obtain a dialling tone. By
entering the digits of the phone number you require your telephone will dial the
number directly. When making a call in this way, it is not possible to correct
individual digits of the phone number as described above.
4.4
Adjusting the receiver volume
If you want to change the receiver volume on the handset you have four volume
steps available.
Press several times the
button to change the receiver volume. The
selected volume is indicated in the display.
