Putting the Telephone into Operation
24
Inserting the batteries
Insert the batteries in the open
battery compartment. Only
use batteries of the type AA
alkaline 1.5V. Pay attention to
correct polarity.
Close the battery compart-
ment.
Insertion of batteries is not absolutely essential. The telephone
can be operated with or without batteries. The full range of tele-
phone functions can only be used when batteries or the power
adapter plug are fitted. Pay attention that the telephone is not con-
nected to the telephone line socket and/or mains power connec-
tion when the batteries are being inserted or replaced.
When the batteries are empty, the
icon appears in the display.
Replace the batteries.
Setting the time and date
The time and date are set via the menu. Refer to Page 30 for the se-
quence of menu option selections necessary.
Private branch exchanges
The information on Page 29 explains how to install your telephone in a pri-
vate branch exchange.
Wall installation
Feed the guide tabs (1) on the wall−mounting bracket (2) in the slots (3) on
the underside of the telephone. Slide the wall−mounting bracket 10 mm
upwards until it audibly locks into place. Drill a hole and insert a screw
leaving about 5 mm of the screw projecting from the wall. Guide the
mounting hole (4) in the mounting bracket (2) over the screw and slide the
telephone downwards.
Caution:
Ensure there are no electrical cables, water pipes etc.
in the wall where the hole is drilled.
1
2
3
3
4
Turn the hook (5) in the receiver cradle so that the receiver can be placed
on−hook.
5
5
5
5
5
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
