AudioControl Three.1, Руководство для удовольствия владельца

Страница: 8 / 25

®
Owner’s Enjoyment Manual
source unit. Connecting the RCA and speaker level inputs at
the same time will cause a tear in the time space continuum.
7. Output Jacks: Next to the inputs are the outputs
which should be connected to the front, rear and subwoofer
amplifiers, if applicable.
8. Power Connections: This nifty connector is a
blessing to anyone who has tried to wire up their gear with
their head crammed under the dash. You can wire up the
power, ground, remote turn-on, and illumination from the
convenience of the drivers seat and then casually plug it in
the back of your THREE.1.
9. Balanced Input Selector: Located under the cover
and behind the Input connectors are jumpers that allow you
utilize or bypass the balanced input circuitry. Although it is
shipped in the balanced mode, which is best, it may be
necessary to change this depending upon the configuration
of the components you use. To change this, move the
appropriate jumper on the 3-pin header.
6
Figure 3: Top View of THREE.1
6. Input Jacks: The THREE.1 has 2 sets of inputs, MAIN
and SPEAKER LEVEL. Theses inputs should get their signals
from the main source unit/head unit and should attach to
either RCA jacks
or
speaker leads that are coming out of your
8
9
6 7
10
11
13
12