AudioControl Three.1, Руководство для удовольствия владельца

Страница: 14 / 25

®
Owner’s Enjoyment Manual 12
Simple 2-way system
D. Level Matching
Many manufacturers claim that their source units
produce signal voltages in the area of 2 to 4 volts. However,
what they neglect to mention is that you only achieve these
incredible voltage levels when the volume is turned all the
way up. Try listening to that all of the time. By following
the level matching steps for the THREE.1 you will be able to
take full advantage of the high voltage output of your head
unit.
1. Disconnect the RCA cables leading into your amplifi-
ers, and make sure the only RCA cables between your head
unit and the THREE.1’s main inputs are attached. Turn the
volume level knob on the THREE.1 to maximum.
2. Play a favorite tape or compact disc that contains
consistent, dynamic music and turn the source unit’s volume
control up to its maximum level (NOTE: Some source units
may produce distortion or “clipping”, when their volume
controls are turned all of the way up. If this happens, you
will hear distortion even at low levels when you connect the
rest of the system. If this is the case, lower the source unit’s
volume level until you no longer hear distortion). The
Figure 9: THREE.1 with source, front amp, and sub amp