AudioControl Three.1, Руководство для удовольствия владельца

Страница: 7 / 25

In-Dash
tm THREE.1
Owner’s Enjoyment Manual
A GUIDED TOUR OF THE THREE.1
1. Graphic Equalization Bands: Three stereo
controls centered at 125Hz, 1.25KHz, and 12.5 KHz with 12dB
of cut or boost. These controls should be used to tweak your
system, depending upon your mood.
2. Para-BASS Controls: Two simple controls allow for
killer bass tweaking. The sweep knob selects the center
frequency, between 40 and 80Hz. The gain knob provides
12dB of boost or cut, centered around the sweep frequency.
3. Subwoofer Level Control: Exactly what it says it
is. Controls the amount of signal that goes to the sub-woofer
output of your THREE.1.
5
1 2 4 3 5
Figure 2: Front View of THREE.1
4. Fader: When amplifier channels are connected to
the front and rear outputs, the fader control will allow you
to fade the signal level back and forth. This also means you
can have front and rear fading even though your source unit
only has 2-channel outputs.
5. Volume: Because the THREE.1 is a pre-amp unit, it
serves as the main control unit in the audio system. It has a
master volume control that controls the output to all of your
amplifiers. You can now turn the volume control of your
source unit all of the way up and deliver maximum signal to
noise and voltage to the THREE.1.