AudioControl Three.1, Руководство для удовольствия владельца

Страница: 10 / 25

®
Owner’s Enjoyment Manual 8
INSTALLING YOUR THREE.1 IN-DASH
EQUALIZER/CROSSOVER
Having absorbed everything in the manual up to this
point, then you probably know we endorse having a profes-
sional install your THREE.1 as it would be in your best
interest. Above and beyond having all of the appropriate
technical know-how and experience, they have lots of cool
tools.
If you are still with us and are feeling confident, then
read on...
A. Placement and Mounting the THREE.1 In-Dash
Equalizer/Crossover
Placement: By definition, the THREE.1in-dash equal-
izer was designed to be installed on or near the dashboard of
most cars. However, if you are a building a real trick system,
like with a separate audio system in the front and a seperate
one in the rear of a vehicle, the THREE.1 is an ideal pre-amp
control that can mounted in the front and/or the rear of the
vehicle.
Mounting: The THREE.1 is flexible enough to mount
almost anywhere, although somewhere on the dash or in a
Figure 4: THREE.1 with mounting brackets
center console is the most logical. You will want to be able to
access it while you are sitting in the driver’s seat of your
vehicle. The THREE.1 is designed to be physically mounted
almost anywhere in a vehicle, although it is recommended to
avoid hot spots like the firewall, engine compartment, or tail
pipe. The mounting location must also be safe from water
seepage or areas with bad seals (rubber gaskets, not sleek furry
mammals who eat salmon). If there are old water stains be
wary of leaks and stay away.
We have provided brackets assist you in mounting the
THREE.1 chassis under the dashboard or glovebox. The screw
holes on the THREE.1 chassis also allow for easy installation
underneath a radio or with a dash kit. It is of utmost impor-
tance to mount the THREE.1 securely to avoid any undue stress
or breakage from over acceleration or braking.