AudioCodes TP-6310, Руководство по установке оборудования

Страница: 67 / 70

Version 5.4 67 May 2008
SIP Hardware Installation Manual 4. Maintenance and Repair
¾ To replace the Air Filter, take these 2 steps:
1. Remove the Air Filter, by performing the following:
a. Remove the Fan Tray module (refer to ''Replacing the Fan Tray Module'' on page
66 ).
b. With your fingertips, grasp the inside of the steel frame of the Air Filter and pull it
out of the chassis slot. It should slide out relatively easily; if it doesn't, use slightly
more force.
The figure below shows the Air Filter partially removed from the chassis:
Figure 4-3: Removing the Air Filter
2. Insert the replaced Air Filter, by performing the following:
a. With the UPPER SIDE label visible and the INSERTION DIRECTION arrow
pointing toward where the Fan Tray module is typically housed (refer to figure
below for the arrow locations), slide the Air Filter into its slot until it can go no
further.
Figure 4-4: Air Filter
b. Insert the Fan Tray module into the chassis (refer to ''Replacing the Fan Tray
Module'' on page
66 ).