AudioCodes TP-6310, Руководство по установке оборудования

Страница: 29 / 70

Version 5.4 29 May 2008
SIP Hardware Installation Manual 2. Physical Description
2.4.1 LEDs
The 8410 blade provides LEDs for indicating the status of various interfaces, as described
in the tables below.
Table 2-12: Blade Status LEDs Description
Label Color Status Description
Red On Blade failure (fatal error). FAIL
-- Off Normal operation.
Green On Active blade.
Note: Applicable only to Mediant 3000 HA configuration.
Yellow Blinking Redundant blade in standby mode.
Note: Applicable only to Mediant 3000 HA configuration.
ACT
-- Off Standalone blade (i.e., for Simplex configuration).
Table 2-13: Ethernet LEDs Description
Label Color Status Description
On 10/100BaseT Ethernet link established (status of
Ethernet ports on PEM module - refer to ''Power Entry
Module (PEM/DC/3K)'' on page
38 ).
The A LEDs indicate the status of the Ethernet ports of
the bottom PEM module; The B LEDs indicate the status
of the Ethernet ports of the top PEM module.
Note: When Mediant 3000 implements the 8410 blade
series:
ƒ
1A & 1B : indicate status of Control network interface.
ƒ
2A & 2B : indicate status of OAM network interface.
Green
Blinking Data is being transmitted or received.
ETH
(1A, 1B, 2A, 2B)
-- Off No Ethernet link.
On Gigabit Ethernet link established (status of Ethernet
ports on RTM-8410 - refer to ''Rear Transition Module
Blade (RTM-8410)'' on page
32 ). This LED represents
Media network traffic.
Green
Blinking Data is being transmitted or received.
GBE
(1, 2)
-- Off No Gigabit Ethernet link.