AudioCodes MP-26 series, Руководство пользователя

Страница: 357 / 464

User's Manual 19. Maintenance
Version 4.4.0 357 MP26x/MP27x
19.5.2 Uploading Configuration File from a Remote Server
The procedure below describes how to upload a configuration file to the device from a
remote server. This allows you to keep your configuration up-to-date, by performing daily
checks for a newer configuration file each time the device restarts (i.e., automatic update),
or manually checking for a newer configuration file.

To upload the device's configuration file from a remote server:
1. Click the Upload Configuration File ; the screen 'Upload Configuration File' opens.
Figure 19-13: Upload Configuration File (e.g., MP-264)
2. Under the 'Load the Configuration File From Remote Server' group, select the
checking method and interval:
•
Automatically check for new configuration file
•
Automatic configuration file check disabled
3. In the 'Remote Configuration File URL' field, enter the URL address of the remote
server where the configuration file is located. The URL format is as follows:
protocol://server/filename.<conf/ini> , for example:
•
ftp://10.10.10.10/MP20x_<MAC>.conf
•
http://20.20.20.20/MP20x_<MAC>.ini
Where <MAC> is the MAC address of the device.
4. In the 'Check every' field, enter the interval (in hours) for which the device periodically
checks for a new configuration file. If set to 0, the device checks only once for a new
configuration file, and this occurs after it restarts.
5. From the ‘SSL Mode’ drop-down list, select the type of Secure Socket Layer (SSL)
certificate's validation method for accessing the remote server using HTTPS for the
following purposes: downloading a new firmware file, downloading a new configuration
file, and TR-069. Upon connection, the device validates the server's certificate using
the selected method:
•
None: Do not validate the server's certificate (if you do not have a certificate).
•
Chain: Validate the entire certificate chain (if you have a certificate, but not
necessarily signed by a root CA).
•
Direct: Ensure that the server's certificate is signed by the root certificate (CA).
6. Click OK ; the download process begins. When downloading completes, a confirmation
screen appears, prompting you to confirm loading the new version.