AudioCodes MediaPack MP-202 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 212

AudioCodes MediaPack MP-202 Скачать руководство пользователя страница 38

MP-202 Telephone Adapter

38

LTRT-50604

MP-202

Table

5-2: VoIP - Signaling Protocol - SIP Proxy and Registrar

Parameter

Description

SIP Transport Protocol

*

Choose either UDP (default) or TCP.

Local SIP Port

*

The UDP/TCP port (default = 5060) on which the Stack listens.

Gateway Name-User
Domain

*

This domain name will be sent in the From header of outgoing Invite
messages.

Use SIP Proxy

When checked, outgoing calls will be routed to the configured SIP proxy. If
the parameter 'Use SIP Proxy IP and Port for Registration' is checked as
well, the configured SIP proxy will also be used as the registrar, allowing
incoming calls.

Proxy IP Address or
Host Name

The IP address or host name of the SIP proxy.

Proxy Port

The UDP or TCP port of the SIP proxy.

Use SIP Proxy IP and
Port for Registration

Use the SIP proxy IP and port for registration. Default = checked. When
checked, there is no need to configure the address of the registrar
separately.

Use SIP Outbound
Proxy

Use an outbound SIP proxy (all SIP messages will be sent to this server as
the first hop). Default = unchecked.

*

This parameter appears only in 'Advanced' mode.

«
...
36
37
38
39
40
...
»

Содержание MediaPack MP-202





















































































































































































































Отзывы:

Нет отзывов