MP-202 Telephone Adapter
188
LTRT-50604
MP-202
¾
To enable automatic configuration download at power up:
1.
Using Telnet, access the device and enter the user name and password.
2.
Set the following configuration parameters:
rg_conf_set /rmt_config/enabled 1
rg_conf_set /rmt_config/url <required url>
( for example rg_conf_set /rmt_config/url http://myserver.com/my_conf_file.conf )
The next time the device is powered up, it will attempt to download the configuration
file.
Notes:
The configuration parameter ‘/rmt_config/version’ defines the version of the
configuration file. The device uses the new configuration file only if the version that is
defined in this file is larger than the current version. By default, the ‘version’ is set to 0.
This means that each time Service Providers’ operations personnel require the device
to download a new configuration file, they need to increment the ‘version’ parameter in
the new file (in the .conf file, the ‘version’ parameter is under the section ‘rmt_config’).
The remote configuration file can include a subset of the complete mp202.conf file. A
recommended procedure is to upload a mp202.conf file from a working device system
and remove all sections except those that should be modified by the remote
configuration. For example, a Service Provider can choose to configure just the
section ‘voip’. The configuration file must include the root ‘rg_conf’ and the section
‘rmt_config’. The structure and integrity of the configuration file must be preserved.
The string <MAC> enables the ISP to configure all its deployed systems with the same
URL and file details (under rmt_config/url). Once the URL is configured with the string
<MAC>, the system which is trying to update its configuration file automatically
replaces <MAC> with its own unique MAC address. For example, if there’s a system
with a WAN MAC address 00:01:02:03:04:05, the ISP should configure the url with
command - _conf_set /rmt_config/url http://myserver.com/my_conf_file_<MAC>.conf -
and place a file called ‘my_conf_file_00_01_02_03_04_05.conf’.
13.13 Scheduler Rules
Scheduler rules are used for limiting the activation of Firewall rules to specific time periods,
specified in days of the week, and hours.
¾
To define a Rule:
1.
Click the icon 'Scheduler Rules' in the 'Advanced' screen of the Web-based
Management; the 'Scheduler Rules' screen appears (refer to the figure).
Figure
13-17: Advanced - Scheduler Rules