Hardware Installation Manual
4. Deploying the Device
Version 7.2
21
Mediant 9000 Series SBC
4
Deploying the Device
This chapter describes how to deploy the device. The following sections are described:
Deploying the Rail Kit
Connecting to Power and Replacing Power Supply
Connecting Display and Keyboard
Connecting Device to IP Network for 1-GbE Copper
Connecting Device to IP Network with SFP
Viewing Network Port Status
4.1
Deploying the Rail Kit
Note:
For instructions for deploying the rail system, refer to the printed instructions "Quick
Deploy Rail System Installation Instructions" included in the Rail Systems packaging.
Rack Mount Safety Instructions
When installing the chassis in a rack, implement the following safety instructions:
•
Elevated Operating Temperature:
If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient temperature. Therefore, consideration should be
given to installing the equipment in an environment compatible with the maximum
ambient temperature (T
A
) of 35°C (95°F).
•
Reduced Air Flow:
Installation of the equipment in a rack should be such that
the amount of air flow required for safe operation on the equipment is not
compromised.
•
Mechanical Loading:
Mounting of the equipment in the rack should be such that
a hazardous condition is not achieved due to uneven mechanical loading.
Warnings:
•
Two
people are required to mount the device in the 19-inch rack.
•
When attaching the chassis to the rack, it is
mandatory
to connect it using both
the front-mounting brackets and the rear-mounting brackets (supplied).
Содержание Mediant 9000 Rev. B
Страница 2: ......