88
9
Selecting the operating frequency
Select the operating frequency you want to use from the
label on the side of the DX 2020. Set the F1/F2 switch to
F1 (first column of frequencies) or F2 (second column of
frequencies). Rotate the switch on the side of the DX
2020 using a small screwdriver to select the frequency, 1
to 16.
Switch the DX 2020 off and back on again to enable the
change in frequency.
Connecting the antennae
Connect the antennae to the SMA connectors marked
RX1 and RX2. Connect the straight antenna to one
socket and the right-angled antenna to the other socket.
Indicators during correct operation
The DX 2020 should switch between the RX1 and RX2
receivers for best reception, as indicated by the RX1
and RX2 indicators:
RX1
RX2
The ‘No signal’ indicators will not be lit if the
corresponding TX 2020 transmitter is on.
External powering
If the DX 2020 receiver is to be externally powered,
ensure that the appropriate cable is used.
DX 2020 Receiver
Содержание RMS 2020
Страница 1: ......