Audio RMS 2020, Руководство пользователя

Страница: 25 / 31

88
25
CHAPTER
7
Troubleshooting
This chapter provides step-by-step troubleshooting
procedures for any combination of RMS 2020 System
products.
Experience has shown that the majority of problems are
due to bad batteries, faulty antennae, and faulty cables,
as these items are most susceptible to damage. Please
check these items first, and check that the LED
indicators are correct, before proceeding further.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
DX 2020
No signal indicator illuminating on the receiver
• Check that the batteries are good and correctly
inserted.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
TX 2020
• Check that the transmitter overload indicator flashes
when plugging in the mic.
• Check that the frequencies on the transmitter and
receiver match.
• If the frequency has been changed check that the
transmitter and receiver were both turned off and
then back on to enable the change.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
HX 2000
• Check that the frequencies on the hand-held
transmitter and receiver match.
No audio output
Assuming all indicators are functioning correctly:
• Check that the mic gain setting is in the correct
position for application (positions 8 and 9 on the mic
gain setting are for line input only).
• Check that the microphone is working. Shout into the
mic at mic gain setting 7, and check that the overload
indicator flashes.
• Check the output cables.