Audio Pro AVD-303, Инструкция по эксплуатации, Страница: 33 / 66

33
Speaker Setup
Adjust each speaker relative volume balance so that the volumes of
all speaker’s test tones sound equal at the listening position.
Initial setting is 0 dB for all speakers.
1
Press SETUP for more than 3 seconds.
The test tone is played back from the front Left speaker.
Adjust the MASTER VOLUME so that it is slightly loud and
fix it there.
2
Press LEVEL +/– to control the speaker level.
The speakers will be switched as follows in intervals of about
2 seconds.
Adjust the volume with the LEVEL +/– buttons while the
indicator is flashing so that the volume from all speakers
appears the same. Level adjustments possible in the range
from –10 dB to +10 dB.
After all speakers have been adjusted, operate the Delay time
setting (see page 34).
Note
Make sure you adjust the test tone volume by Test Tone before
playing back discs.
Adjusting Each Speaker’s Relative
Volume Balance - Test Tone
LEVEL +/–
SETUP
FL CEN FR RS LS SW