Audio Pro AVD-303, Инструкция по эксплуатации, Страница: 19 / 66

19
If your TV has Component Input
connector
If the TV or monitor has component video inputs, making this type of
video connection will produce ideal picture quality for the
presentation of DVD-Video. Using a component video cable (sold
separately), connect the DVD OUT COMPONENT jacks to the
corresponding component video input jacks on the TV.
Actual labels for component video inputs may vary depending on the
TV manufacturer. (e.g., Y, R-Y, B-Y or Y, C
B
, C
R
)
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case, adjust
the TV or monitor for optimum performance.
This connection is necessary to use progressive function.
To view Progressive scan video, you need a TV with Progressive
scan capability. Please check your Tv’s manual.
Notes
> If the connected TV supports the progressive function, Progressive
Output is available for selection.
> The DVD Player can output NTSC or PAL format video depending
on the setting on page 27. Make sure your TV supports the disc’s
video format.
Tip
When the TV has a COMPONENT terminal, the DVD image will be played back with higher picture quality in case of COMPOSITE
connection. Connect the COMPOSITE video cable also in this case.
Select the scanning method (Progressive/Interlace) of the Component Video output using the button on the front panel.
During stop mode, while pressing the button on this unit, press and hold the SURROUND button for 5 or more seconds. Each time the
button is held down, the setting changes as follows:
P SCAN ON
P SCAN OFF
P SCAN ON: When progressive scanning is unavailable with certain discs, the scanning method is switched automatically to interlaced
scanning. When the scanning method is changed, the scanning status will be displayed for a few seconds.
P SCAN OFF: Scanning method is fixed at interlaced scanning.
P
B
P
R
Y
Component video connection
cable (not supplied)
> In the MENU Preferences - Video output, the default RGB
setting must be changed to COMPONENT.
/II
/II
Note
The P-scan mode is automatically recovered when the CD/MP3/Jpeg disc is ejected.
Tip