Audio Pro AVD-303, Инструкция по эксплуатации, Страница: 26 / 66

26
Connecting the Power/Turning on the DVD receiver
Before connecting
• Make sure that all the connections from pages 17 to 25 are
complete (the connection to the TV is required).
• Turning on the DVD receiver may cause a momentary power
surge, which might interfere with other electrical equipment such
as computers. If this happens, use a wall outlet on a different
circuit.
1
Connect the power cord to a wall outlet.
2
Press POWER on the DVD receiver to turn on the
DVD receiver.
3
The display on the DVD receiver’s front panel
light.
> To put the DVD receiver in the standby mode, press
POWER on the remote controller. Be sure to set the
volume to minimum before putting the DVD receiver in the
standby mode for the next use to avoid sudden loud sound
reproduction.
> While in the STANDBY mode, the DVD receiver can
receive signals from the remote controller.
Setting the POWER button on the remote controller to
set the DVD receiver to standby does not turn off the power
completely.
POWER
STANDBY indicator
To wall outlet
• The AVD-303 is shipped with the POWER in the ON position.
( ) When the power cord is plugged in for the first time, the
AVD-303 will automatically turn on.
POWER