Audio Precision ATS-2, Начало работы

Страница: 52 / 76

For more details, see Chapter 16 of the ATS-2 User’s Manual .
Saving and Loading Tests
At any time, the current workspace setup can be saved to a file. The file
contains the settings on all the panels (including panels that are not visible
in the workspace), the panel positions, and references to any other files
that were attached, such as limit data. The file also contains the most
recent data obtained from any sweeps that were run.
When a test is loaded, the workspace reverts to the exact configuration
it had when the test was saved. The data from the test is available and can
be further processed. It can also be re-graphed automatically when the test
is loaded. See Chapter 25 of the
ATS-2 User’s Manual for more details.
To save the current workspace, choose File > Save > Test, or click
the Save Test button in the Standard toolbar. To load a lest, choose
File > Open > Test, or click the Open Test button in the Standard
toolbar.
The Next Step
In this chapter, we have introduced two instruments : the audio analyzer,
and the FFT spectrum analyzer. ATS has other instruments to measure
audio signals in different ways. The
ATS-2 User’s Manual describes all the
instruments in detail.
We have also introduced the sweep , which is at the heart of ATS
automated measurements. The sweep engine and its features are
described in more detail in Chapter 15 of the
ATS-2 User’s Manual .
We set up tests by hand using the mouse and keyboard, and saved
them to disk. ATS also contains a complete programming language to
allow you to execute complex measurement sequences programmatically.
Chapter 23 of the
ATS-2 User’s Manual describes how to program the
instrument, and the AP Basic User’s Guide and Language Reference
describes the language itself.
Chapter 5: Quick Guides Saving and Loading Tests
42 Getting Started with ATS-2