manualshive.com logo in svg

Audient evo 16, Руководство пользователя

Поделиться
Скачать
Audient evo 16 Скачать руководство пользователя страница 38

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN 
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE 
USER TO THE PRESENCE OF UNINSULATED “DANGEROUS 
VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY 
BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF 
ELECTRIC SHOCK TO PERSONS. 

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE 
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF 
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) 
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE 
APPLIANCE.

WARNING

CAUTION REGARDING PLACEMENT

To maintain proper ventilation, be sure to leave a space around the unit (from 
the largest outer dimensions including projections) than is equal to, or greater 
than shown below.

It is not advised to run the unit in a rack above hot units such as valve outboard 
and multichannel AD/DA converters without suitable ventilation space around 
the unit. Ensure side air vents are not covered.

Left and Right Panels: 10 cm
Rear Panel: 10 cm
Top Panel: 10 cm

DO NOT

 install near any heat sources such as radiators, heat registers, stoves, 

or other apparatus (including amplifiers) that produce heat.

DO NOT

 defeat the safety purpose of the polarized or grounding - type plug. A

polarized plug has two blades with one wider than the other. A grounding type 
plughas two blades and a third grounding prong. The wide blade or the third 
prong is provided for your safety. When the provided plug does not fit into your 
outlet, consult an electrician for replacement of the obsolete outlet.

SAFETY INSTUCTIONS

SAFETY INSTUCTIONS

Tel: 0044 1256 381944       [email protected]    

support.audient.com

Содержание evo 16








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды