Audi Genuine Accessories 80A.071.128, Руководство по установке

Страница: 7 / 18

WARNING
All bolt connections and connections for the roof bars
and for the add-on components must be checked prior to
travelling to make sure they are positioned and installed
correctly. Tighten if necessary.
Recheck bolted connections and connections at appro-
priate intervals and tighten if necessary. The bolted con-
nections and connections must be checked at short inter-
vals if travelling on a poor stretch of road.
If these guidelines are not observed, this can result in the
carrier units or the roof rack modules becoming loose or
falling off – risk of accident!
WARNING
For the safety of other road-users, the roof bars and any
add-on components must be removed from the vehicle
when they are not being used.
WARNING
Repairs or the replacement of parts must only be per-
formed by a qualified workshop. It is recommended that
genuine spare parts available from your Audi partner are
used.
Caution
Do not enter a car wash with roof bars with/without add-on
components installed.
Note
Driving with the bicycle rack attached can cause increased wind
noise.
Note
◆
Observe the relevant statutory regulations for using bicycle
racks in other countries.
◆
Remove the bicycle rack when it is not in use.
◆
We reserve the right to make technical changes.
Installation instructions - Bicycle rack
Edition 01
2 Safety notes 5