Audi Genuine Accessories 80A.071.128, Руководство по установке

Страница: 13 / 18

Item a b
-1- Min. 22 mm; max.
80 mm Min. 22 mm; max.
100 mm
-2- Min. 22 mm; max.
80 mm
Permissible frame sizes
– Use the key -4- provided to open the lock on the rotary knob
-8-.
– Swivel the retainer -3- upwards -arrow a-.
– Place the bicycle carefully on the bicycle rack and hold it in
place.
– Position the fastener -2- on the down tube -F- of the vehicle
frame in the vicinity of the chain wheel -G-.
Caution
The fastener -2- on the retainer -3- must be located as close
as possible to the chain wheel -arrow-.
Position the down tube -F- in the centre of the fastener -2-
on the retainer -3-.
– Turn the rotary knob -8- to the right until the fastener -2-
holds the down tube -F- gently in place.
– Align the wheel mounts -1- vertically below the wheel hubs
-H-.
– Turn the rotary knob -8- to the right as far as it will go.
– Route the tensioning belt -11- between the spokes and over
the wheel rim. The rim protector -12- must be positioned
centrally over the rim.
Installation instructions - Bicycle rack
Edition 01
5 Installing/removing the bicycle rack and bicycle 11