Audi Genuine Accessories 80A.071.128, Руководство по установке

Страница: 16 / 18

6 Additional installation work
The additional installation work requires technical skill and
special tools. It is therefore recommend that the work be
carried out by an Audi partner or a qualified workshop.
6.1 Changing the installation direction to
make it easier to secure the bicycle on
the left-hand side of the vehicle
◆
Work is carried out with the bicycle rack removed.
– Remove the end pieces -J- from the ends of the support bar
-7-. Remove the wheel mounts -1- and the movable bearing
(rear) -6- -direction of the arrow-.
– Rotate the bicycle rack.
– Using a screwdriver, loosen the plugs -magnifying glass-.
– Remove the base and rotate it 180°.
– Swivel the retainer -3- into the new basic position.
– Using a screwdriver, tighten the plugs -magnifying glass-.
– Position the base such that dimension X = 250 mm from the
end of the support bar.
Caution
The base must be located beneath the bicycle rack in its
swivelled position — risk of roof damage.
– Push the wheel mounts -1- onto the support bar -7-; the tall-
est side of the wheel mounts -1- should be located on the
side angled away from the rotary knob.
– Place the end pieces -J- on the ends of the support bar -7-.
6.2 Checking the installation of the retainer
◆
Work is carried out with the bicycle rack removed.
– Rotate the bicycle rack.
Installation instructions - Bicycle rack
Edition 01
14 6 Additional installation work