Operation Instruction Manual
WS-1500APH
Programmable Precision PID Temperature Controller
Version 1.2
Auber Instruments
730 Culworth Manor
Alpharetta, GA 30022
770-569-8420
Aug. 2008
Introduction
Thank you for purchasing the Auber WS series temperature controller. We sincerely
appreciate your decision and trust that our machine will meet your expectations in both
the quality of the result and the value of our product. While we are delighted that you may
be anxious to operate the controller for your project, a few minutes of your time reading
through this manual will only serve to enhance your experience in the months and years
ahead. In particular, we would urge you to read through the safety warnings below.
Although this plug-and-play controller is very easy to operate, the process involves high
temperature and high wattage appliances and your safety is paramount.
SAFETY WARNINGS
•
This controller is designed only to be used with devices that have limited power
and their own thermal cut off protection, such as a thermostat or thermal fuse in
case of controller failure. Do not use it with a cook top or hot plate.
•
Do not place any objects on the top of controller surface which is used to vent
excess heat during its operation.
•
The sensor supplied is optimized for air sensing with fast response time. It can’t
be immersed in liquid. To use this controller for control temperature of liquid such
as slow cooker, please contact us for sensor designed for immersion.
•
When open the cover of a rice cooker or slow cook that has been running for
extended period of time, the cover will carry a lot of condensation that can drip to
everywhere. Avoid drip the water over the controller.
•
The maximum electric current this controller can handle is 15 ampere. For 120
volt ac in US and Canada, this limits the heater power to1800 watts. In addition, if
*
Patent pending
1
