Saf
ety Precautions
●
If soiled, wash by hand without using a brush, etc., holding the
product so that the back cover and external connection terminal
cover do not open.
■
After the product gets wet
●
After becoming wet, drain water, and then without removing the
back cover, wipe both the product and back cover with a dry, clean
cloth.
●
In cold regions, any water on the product may freeze. Using the
product with frozen water may cause malfunction. Do not leave
water drop on the product.
■
Rubber seals
●
The rubber seal around the external connection terminal cover and
on the product body when the back cover is opened are important
in maintaining water resistance. Do not scratch or remove them.
●
Be careful not to pinch the rubber seals when closing the external
connection terminal cover or back cover. Trying to close the covers
with a seal pinched can scratch the seal and affect water
resistance. Any minute particles becoming lodged between contact
surfaces (a single hair, etc.), no matter how small, can cause
seepage.
●
Any liquid other than water (alcohol, etc.) on the product can affect
product durability.
●
Do not insert pointed objects in the external connection terminal
cover or back cover. Doing so may damage/deform the product or
scratch the seals, allowing water seepage.
●
Parts used for maintaining water resistance should be replaced
every 2 years regardless of their appearance. Contact your nearest
au shop for replacement.
■
Heat resistance
●
Do not submerge the product in hot water or get it wet with hot
water. Do not use the product in saunas or expose it to hot air from
hair dryer etc. The product is not designed to be heat resistant.
■
Shock
●
The product is resistant to shock, but product shock resistance
assumes usage in daily situations; subjecting the product to
excessive shock such as by throwing or causing/letting the product
fall forcefully may break the product.
Precautions on Charging
●
Accessories and optional accessories are not water/dust resistant.
Note the following before and after charging.
•
Never charge the battery if the product is wet. Doing so might
cause electric shock or short circuit resulting in fire, a fault or
burns.
•
Make sure the product is not wet. If charging after the product
has gotten wet, first drain water well and wipe with a dry, clean
cloth, etc., before placing in the desktop holder (KYF33PUA) (sold
separately) or opening the external connection terminal cover.
•
If you opened the external connection terminal cover to charge,
close the cover firmly after charging. To prevent seepage from the
external connection terminal cover, you should charge using the
desktop holder (KYF33PUA) (sold separately).
•
Do not touch the specified charger (sold separately) with wet
hands. Doing so may cause electric shock.
•
Do not expose the specified charger (sold separately) and
desktop holder (KYF33PUA) (sold separately) to water. Do not
use it near water, such as in a bathroom, shower room, kitchen, or
washroom. Doing so may cause fire, burns, electric shock, or a
fault. Do not bring it into a bathroom, etc. even when you are not
charging with them. Doing so may cause fire, burns, electric
shock, or a fault.
25
