Saf
ety Precautions
Part
Material
Surface Treatment
Infrared port window,
manner/shutter key,
external connection
terminal cover
PC
-
Cursor key, ring around
sub-display, camera ring
Aluminum
Anodized aluminum
Window panel (main
display)
Chemically
strengthened
glass
Antifouling
Window panel (sub-
display), charging/
notification indicator
window, camera plate
PMMA
Hard coat processing
Photo light/Flash light
PMMA
-
Metal plate around
speaker
SUS
Baking finish
Charging terminal
Alloy of zinc
Gold plating (with Ni
plating)
Lock knob
SUS
Ni plating
Ornament screw
(LCD-side, KEY-side)
SWCH
Baking finish
IC card tray, protective
case
POM
-
■
IC Card Tray Ejecting
・
LOCK Rotating Tool (Sample)
Part
Material
Surface Treatment
Outer region
POM
-
Handling Precautions
These precautions are provided to prevent product faults and to
ensure that performance can be fully demonstrated.
Thoroughly read these precautions to ensure correct use.
■
Precautions common to the main unit, battery pack, back
cover, charger, au IC card, peripheral devices
●
Do not apply excessive force to the product during use. Be sure
not to put the product into a tightly packed bag or place a heavy
object on the product in a bag. Sitting on the product in your
pocket might damage the display or internal circuit board resulting
in a malfunction.
Keeping an external connection device connected to the external
connection terminal might damage the connector resulting in a
malfunction. Such damage and malfunction are not covered by the
warranty, even if there is no external damage.
●
To ensure waterproof property (equivalent to IPX5 and IPX8) of the
product, use the product with the back cover and external
connection terminal cover tightly closed.
Note that the waterproof property is not guaranteed in every usage
condition. Do not allow water to get inside the product or splash
water on the battery pack, charger, or optional accessories. Do not
attach/remove the back cover of the product in the rain or with any
water on its surface, and do not open/close the external connection
terminal cover. Doing so may cause water intrusion resulting in
internal corrosion.
Malfunctions determined to be caused by such water intrusion are
not covered by the warranty.
17