26
Getting
.ready
• Insert in the correct direction.
• Do not use force to attach or remove.
◎ Do not lose the au Micro IC Card (LTE) after it has been
removed.
◎ Do not touch contact part when attaching/removing au Micro IC
Card (LTE). Failures may occur in FeliCa communication.
◎ If an au Micro IC Card (LTE) is not inserted,
appears. And the
following operations cannot be performed.
- Making/receiving calls
- Sending/receiving E-mail (@ezweb.ne.jp) and SMS
- Setting PIN code
- Checking own number
- Making emergency calls to 110 (Police), 119 (Fire institution),
118 (Regional Coast Guard Headquarters) and 157 (Customer
Service Center)
Attaching the au Micro IC Card (LTE)
1
Remove the battery pack and cover, then
with the IC (metal) side down, insert the au
Micro IC Card (LTE) at the orientation shown
all the way into the card slot
When an au Micro IC Card (LTE) is inserted, it touches lightly
the guide inside the slot. Insert it all the way into the slot
until it clicks.
Notch
Removing the battery pack
1
Remove the battery cover
2
Put your finger on the battery pack using
the groove of the product and lift the battery
pack in the direction of the arrow to remove
Groove
au Micro IC Card (LTE)
Your phone number etc. is recorded
in the au Micro IC Card (LTE).
• The product is compliant with
au Micro IC Card (LTE) only.
You cannot use the product
by inserting the au IC-Card for
au phones and smartphones
instead.
◎ Power off the product and remove the battery pack before
attaching/removing the au Micro IC Card (LTE).
◎ Note the following points, otherwise handling the au Micro IC
Card (LTE) may cause malfunction or damage.
• Do not touch the IC (metal) part of the au Micro IC Card (LTE)
or the IC card terminal inside the product.
(Adverse
side)
(Reverse
side)
IC (metal)
part
au Micro IC Card (LTE)