13
Getting Ready
Attaching the Battery Pack
Make sure that the
battery lock is set to
the “FREE” position
Make sure that the PULL
tab of the battery pack is
securely attached within
the dashed line, confirm
the position of the
contacts on the IS11CA,
and then firmly insert the
battery pack
Contacts on
IS11CA
PULL tab
Hold the battery pack
cover so that the three
tabs on the top edge are at
an angle, and then insert
them into the holes in
the IS11CA and close the
battery pack cover
Holes
Tabs
Firmly press the battery pack
cover at the eight places
shown in the figure, make sure
that the entire battery pack
cover is firmly seated in place,
and then slide the battery lock
to the “LOCK” position
Before attaching the battery pack, make sure that the microSD
memory card and au IC-Card are inserted securely. If the card
is not completely inserted, that may lead to microSD memory
card, au IC-Card, or battery pack damage.
Failure to follow the correct procedures when attaching the
battery pack may result in damage to the battery pack or
battery pack cover.
If the battery pack cover is forcibly pushed with fingers with the
tabs of the battery pack cover attached on the battery pack, the
tabs may be damaged.
au IC-Card
An au IC-Card records your
personal information such as
phone numbers, etc.
IC (metal surface) part
au IC-Card
Note the following not to cause malfunction or damage when
you insert or remove the au IC-Card.
Do not touch the IC (metal surface) part of the au IC-Card or
the IC card slot part of the IS11CA.
Confirm the correct direction when you insert the au IC-Card.
Do not insert or remove the au IC-Card forcefully.
•
•
•
Take care not to lose your au IC-Card when you remove it.
•
•
•
•
•
