32
[INST/EFFECT] Randomize parameters function
Instrument and effect parameters
In firmware version 2.00, a randomize parameter function for Instrument layers and effects has been implemented. There
are various settings that control the randomization algorithm.
To access the randomize function settings, you must first enter either instrument edit mode (push 1 PITCH and 2 DECAY
simultaneously) or the effect edit mode (push 3 BEND and 4 VOLUME simultaneously). In either edit mode, press the 2
DECAY button three times and the settings screen for randomize parameters will display..
In Instrument edit mode, the lower line of the LCD will display:
Rnd:MainPrm 50%
In Effect edit mode, the lower line of the LCD will display:
Rnd:Reg.Prm 50%
The setting for ‘Rnd:’ indicates the parameter set that the randomization algorithm will target, whereas the % value
indicates the strength of randomization.
For Instruments, there are four different settings that correspond to timbre layer parameter sets that the randomization
algorithm will target:
Main parameters (MainPrm), Sub parameters (SubPrm), Extra Parameters (XtraPrm), and Main+Sub+Extra layer
parameters (M+S+X).
For Effects, one target setting Reg.Prm works to randomize parameter sets for eight different kinds of effects (Reverb,
Delay, Chorus, Flanger, Phaser, Wah, Space R, Space Z).
For the Multi-Tap Delay effect, there are six different target settings for parameter randomization:
Time parameters (Time Prm), Level parameters (Lev Prm), Pan parameters (Pan Prm), Time-and-Pan parameters (Time
Pan), Time-and-Level parameter (T+L+P) and, Feedback level-and-High frequency Damping (FB/HFD).
The table below summarizes the Instrument edit and Effect edit settings that determine the parameter sets targets for
randomization.
Edit
Randomizing type
INST Edit
MainPrm, Sub Prm, XtraPrm, M+S+X
EFFECT Edit (Reverb, Delay, Chorus, Flanger,
Phaser, Wah, SpaceR, SpaceZ)
Reg.Prm
EFFECT Edit (Multi-Tap delay)
TimePrm, Lev Prm, Pan Prm, TimePan, T+L+P, FB/HFD
