26
[EFFECT] Supports BPM display of Delay Time
Following the release of firmware version 1.20, the delay time for delay effects can be displayed and adjusted as a BPM
value.
When editing the delay time parameter, use the and
buttons either side of the LCD display, to switch between time
values in milliseconds (ms) or BPM.
When BPM mode for delay time is selected, the tempo value is adjusted by rotating the encoder. The note value is
selected and adjusted by simultaneously pushing in and rotating the encoder.
Display mode
Display example
ms mode
Time L : 500ms
BPM mode
Time L : 4/120
The range of BPM values is from 60 to 240, and the range of note values is from quarter notes to triplet sixteenth notes.
TEMPO
60
120
240
note
4
1000.0ms
500.0ms
250.0ms
.8
750.0ms
375.0ms
187.5ms
8
500.0ms
250.0ms
125.0ms
.16
375.0ms
187.5ms
93.7ms
16
250.0ms
125.0ms
62.5ms
T4
666.6ms
333.3ms
166.6ms
T8
333.3ms
166.6ms
83.3ms
T16
166.6ms
83.3ms
41.6ms
The table below shows the conversion of delay time values from milliseconds (ms) to BPM.
Delay Time
Note
BPM
over 1000.0ms
quarter note
4/60
250.0ms -- 1000.0ms
quarter note
4/***
125.0ms -- 249.9ms
eighth note
8/***
62.5ms -- 124.9ms
sixteenth note
16/***
41.6ms -- 62.4ms
triple sixteenth note
T16/***
less than 41.6ms
triple sixteenth note
T16/240
Instrument and effect parameters