■
Notes
Do not overload
The limit of overload capacity is 120% of full scale.
When the load is reached to 110% of Full Scale,
“ OVERLOAD “ is indicated on display. Keep it
within 100% of Full Scale. This is the cause for
the breakdown of load sensor.
※In case of over load setting 1 ～ 100 %,
“ OVER LOAD “ will be indicated on display when the
load is reached over your setting value.
(Regarding over load setting, please see page No.9.)
Do not use other adapter
Should other adapter be used, there are possibility
to breakdown or may lead to a fire. Also, do not
charge or operate unit in other voltage.
Do not impact or damage unit
This is the cause for the breakdown of load sensor or
other troubles.
Do not store and operate in the following conditions
※ Wet area ※ Where dew condensation
※ Dusty area ※ Where oil or chemicals
Do not disassemble, trouble-shoot and remodel
Should you perform any of these, that may cause
malfunction of the unit.
－２－ ATTONIC
