Page 26
III.5.c.
Mounting the attoAFM I sensor head into the housing
Before mounting the attoAFM I head into the housing make sure that
the z-positioning stage is fully retracted and that the cantilever
cannot touch the sample, i.e. sits clearly above the later.
Now slide the aligned attoAFM I head into the microscope housing
and tighten the two screws on top of the housing (see arrow).
This will fix the slider with the microscope head in place that also
makes an electrical contact to the microscope stick (e.g. the dither
piezo connection).
o
Содержание attoAFM I
Страница 20: ...Page 20 III 5 Changing the AFM Cantilever...
